Precautions for storage of membrane switches:
The bubble wrap lining between the membrane switches is used to reduce pressure on the buttons and prevent failure, and should be retained;
2. The transparent film covering the front and back of the membrane switch is used to protect the display window of the membrane switch and should not be easily torn off;
3. After removing several membrane switches, they should be tied up as they are, but not too tightly;
4. Thin film surface stickers and switches that have a tactile feel and a large quantity need to be packed vertically to prevent the buttons from becoming ineffective due to prolonged heavy pressure;
5. The outgoing line of the membrane switch should be protected and cannot be placed facing downwards;
6. For membrane switches with display windows, it is necessary to prevent the material from bending under stress when handling or placing, as it may leave creases;
7. The membrane switch should be stored indoors at room temperature and treated to prevent dust. There should be no acidic, alkaline, or other corrosive gases in the surrounding air.